China 20HP Screw Air Compressor with Tank and Air Dryer/ Filter 15kw with Best Sales

Solution Description

SP-20A-8(20HP,15kw) Compressor parameters

  Identify unit parameter Remarks
one Kind of air compressor   SPT-20A  

2 flow mthree/min 2.one two.1 1.9 one.five  
3 Consumption strain MPa 0.1003  
4 ambient temperature ºC 0-forty five  
5 Exhaust pressure MPa .seven .eight one. 1.3  
6 Cooling mode   Air-cooled  
7 Exhaust temperature ºC < ambient temperature +15  
8 Transmission mode   Belt generate  
nine Gas outlet oil PPm ≤3  
10 Major motor type   Y2-132L-two  
eleven Electricity kW 15  
12 velocity r/min 2895  
13 Motor bearing variety   SKF  
14 Electrical power Provide   380V/50Hz  
15 Insulation Quality of Major Motor   F  
sixteen Insulation Grade of Major Motor   IP54  
17 Starting up manner   Y-Δ  
eighteen Device bodyweight dB(A) 63±2  
19 Form (duration, width, peak) mm 960×810×970  
20 Device excess weight kg 230  
21 Outlet diameter Inch G3/4″  

 

Basic installation sketch:

notes:
one,Air compressor must be set up in the site to steer clear of direct sunshine and rain, not reduced-lying h2o accumulation the place wants easy air flow to aid heat dissipation.
2,The set up situation of the air compressor need to depart ample room absent from the wall floor to facilitate later on upkeep and fix.
3,The connecting pipe diameter of the total set of air compressor products shall not be significantly less than the outlet dimension of the air compressor, and the inlet and outlet of the filter and the chilly dryer shall not be reversed the filter shall be mounted vertically downward.
 

SP-20A-8 Configuration Checklist of Screw Air Compressor

Identify Supplier manufacturer
Compressor main engine Atlas Copco
Motor Zoda motor
Intake valve Atlas Copco Customization
Minimal stress valve Atlas Copco
Temperature management valve Atlas Copco
Oil-fuel separator filter component Atlas Copco Customization
Oil filter factor Atlas Copco Customization
air filter cartridge Guy Hummel
Stress sensor Danfoss
Temperature sensor Jumo
Belt Optibelt
Principal motor wheel Xihu (West Lake) Dis. Tuo
Motor wheel Xihu (West Lake) Dis. Tuo
cooler Fangsheng HangZhou
Safety valve Eve
Manage method Plett
Exhaust supporter Anrug
Oil and gasoline tank Fu haihua
High strain hose assemblies MANULI
Box and underframe Atlas Copco Customization
Screw oil Atlas Copco

If you have any questions, remember to really feel cost-free to speak to us. 

 

US $3,000
/ Piece
|
1 Piece

(Min. Order)

###

Lubrication Style: Oil-less
Cooling System: Air Cooling
Power Source: AC Power
Cylinder Position: Vertical
Structure Type: Closed Type
Installation Type: Movable Type

###

  Name unit parameter Remarks
1 Type of air compressor   SPT-20A  
20HP Screw Air Compressor with Tank and Air Dryer/ Filter 15kw
2 flow m3/min 2.1 2.1 1.9 1.5  
3 Intake pressure MPa 0.1003  
4 ambient temperature ºC 0-45  
5 Exhaust pressure MPa 0.7 0.8 1.0 1.3  
6 Cooling mode   Air-cooled  
7 Exhaust temperature ºC < ambient temperature +15  
8 Transmission mode   Belt drive  
9 Gas outlet oil PPm ≤3  
10 Main motor type   Y2-132L-2  
11 Power kW 15  
12 speed r/min 2895  
13 Motor bearing type   SKF  
14 Power Supply   380V/50Hz  
15 Insulation Grade of Main Motor   F  
16 Insulation Grade of Main Motor   IP54  
17 Starting mode   Y-Δ  
18 Unit weight dB(A) 63±2  
19 Shape (length, width, height) mm 960×810×970  
20 Unit weight kg 230  
21 Outlet diameter Inch G3/4"  

###

Name Supplier brand
Compressor main engine Atlas Copco
Motor Zoda motor
Intake valve Atlas Copco Customization
Minimum pressure valve Atlas Copco
Temperature control valve Atlas Copco
Oil-gas separator filter element Atlas Copco Customization
Oil filter element Atlas Copco Customization
air filter cartridge Man Hummel
Pressure sensor Danfoss
Temperature sensor Jumo
Belt Optibelt
Main engine wheel Hepu Tuo
Motor wheel Hepu Tuo
cooler Fangsheng wuxi
Safety valve Eve
Control system Plett
Exhaust fan Anrug
Oil and gas tank Fu haihua
High pressure hose assemblies MANULI
Box and underframe Atlas Copco Customization
Screw oil Atlas Copco
US $3,000
/ Piece
|
1 Piece

(Min. Order)

###

Lubrication Style: Oil-less
Cooling System: Air Cooling
Power Source: AC Power
Cylinder Position: Vertical
Structure Type: Closed Type
Installation Type: Movable Type

###

  Name unit parameter Remarks
1 Type of air compressor   SPT-20A  
20HP Screw Air Compressor with Tank and Air Dryer/ Filter 15kw
2 flow m3/min 2.1 2.1 1.9 1.5  
3 Intake pressure MPa 0.1003  
4 ambient temperature ºC 0-45  
5 Exhaust pressure MPa 0.7 0.8 1.0 1.3  
6 Cooling mode   Air-cooled  
7 Exhaust temperature ºC < ambient temperature +15  
8 Transmission mode   Belt drive  
9 Gas outlet oil PPm ≤3  
10 Main motor type   Y2-132L-2  
11 Power kW 15  
12 speed r/min 2895  
13 Motor bearing type   SKF  
14 Power Supply   380V/50Hz  
15 Insulation Grade of Main Motor   F  
16 Insulation Grade of Main Motor   IP54  
17 Starting mode   Y-Δ  
18 Unit weight dB(A) 63±2  
19 Shape (length, width, height) mm 960×810×970  
20 Unit weight kg 230  
21 Outlet diameter Inch G3/4"  

###

Name Supplier brand
Compressor main engine Atlas Copco
Motor Zoda motor
Intake valve Atlas Copco Customization
Minimum pressure valve Atlas Copco
Temperature control valve Atlas Copco
Oil-gas separator filter element Atlas Copco Customization
Oil filter element Atlas Copco Customization
air filter cartridge Man Hummel
Pressure sensor Danfoss
Temperature sensor Jumo
Belt Optibelt
Main engine wheel Hepu Tuo
Motor wheel Hepu Tuo
cooler Fangsheng wuxi
Safety valve Eve
Control system Plett
Exhaust fan Anrug
Oil and gas tank Fu haihua
High pressure hose assemblies MANULI
Box and underframe Atlas Copco Customization
Screw oil Atlas Copco

How to Choose the Right Air Compressor

An air compressor uses pressurized air to power a variety of tools. They are most commonly used to power nailers and impact wrenches. Other popular uses for air compressors include paint sprayers and impact wrenches. While all air compressors have the same basic construction, their specialty differs. Ultimately, their differences come down to the amount of air they can push. Read on for information on each type of air compressor. These tools are great for many different purposes, and choosing the right air compressor depends on your specific needs.
air-compressor

Electric motor

While purchasing an electric motor for air compressor, compatibility is a key factor. Not all motors work with the same type of air compressor, so it’s important to check the manufacturer’s instructions before purchasing. By doing this, you can avoid wasting money on an incompatible motor. Another important consideration is speed. A motor’s speed is its rate of rotation, measured in revolutions per minute. It is critical that you purchase a motor with sufficient speed to meet the needs of your air compressor.
Typically, an electric motor for air compressor is 1.5 hp. It is ideal for use with medical equipment and metal-cutting machines. It also performs well under continuous operation and offers a high efficiency and energy-saving performance. Moreover, it features an attractive price, making it a good choice for a wide range of applications. If you are looking for a motor for an air compressor, look no further than a ZYS series.
A motor’s protection class indicates how the motor will operate. Protection classes are specified by the IEC 60034-5. These are stated with two digits and represent the protection against solid objects and water. For example, an IP23 rating means that the motor will be protected from solid objects, while IP54 means that it will protect from dust and water sprayed from all directions. It is vital to choose a motor with the correct protection class for your air compressor.
When choosing an electric motor, you should consider whether it’s compatible with the brand of air compressor. Some may be compatible, while others may require advanced electronics skills to repair. However, most air compressors are covered by warranty, so it’s important to check with the manufacturer if the warranty is still in effect before you spend a dime on a replacement. The motor should be replaced if it has failed to perform as designed.
air-compressor

Oil bath

Air compressors require proper lubrication to function efficiently. The piston must draw air with minimal friction. Depending on their design, air compressors can either be oil-lubricated or oil-free. The former uses oil to reduce piston friction, while the latter splashes it on the cylinder bearings and walls. Such air compressors are commonly known as oil-flooded air compressors. In order to keep their oil baths clean, they are recommended for use in locations with high dust levels.

Start/stop control

An air compressor can be controlled by a start/stop control. This type of control sends a signal to the main motor that activates the compressor when the demand for air falls below a preset limit. This control strategy is effective for smaller air compressors and can be useful for reducing energy costs. Start/stop control is most effective in applications where air pressure does not change frequently and where the compressor is not required to run continuously.
To troubleshoot this problem, you need to check the power supply of your compressor. To check the supply side, use a voltage monitor to determine if power is flowing to the compressor. Ensure that the power supply to the compressor is steady and stable at all times. If it fluctuates, the compressor may not start or stop as expected. If you cannot find the problem with the air compressor power supply, it may be time to replace it.
In addition to the start/stop control, you may want to purchase additional air receivers for your air compressor. These can increase the capacity of air stored and reduce the number of times it starts and stops. Another way to decrease the number of starts per hour is to add more air receivers. Then, you can adjust the control to match your requirements. You can also install a pressure gauge that monitors the compressor’s performance.
Start/stop control for air compressors can be complex, but the basic components are relatively easy to understand. One way to test them is to turn the compressor on or off. It is usually located on the exterior of the motor. If you’re unsure of the location of these components, check the capacitors and make sure that the air compressor is not running while you’re not using it. If it does, try to remove the capacitor.
Variable displacement control is another way to adjust the amount of air flowing into the compressor. By controlling the amount of air, the control can delay the use of additional compressors until more required air is available. In addition to this, the device can also monitor the energy used in the compressor. This control method can result in substantial energy savings. You can even save on the amount of electricity by using variable displacement control. It is essential for efficient compressed air systems.
air-compressor

Variable speed drive

A VFD, or variable frequency drive, is a type of electric motor that adjusts its speed to match the demand for air. It is an efficient way to reduce energy costs and improve system reliability. In fact, studies have shown that a 20% reduction in motor speed can save up to 50% of energy. In addition, a VFD can monitor additional variables such as compressor oil pressure and motor temperature. By eliminating manual checks, a VFD will improve the performance of the application and reduce operating costs.
In addition to reducing energy costs, variable-speed drives also increase productivity. A variable-speed air compressor reduces the risk of system leaks by 30 percent. It also reduces the risk of system leaks by reducing pressure in the system. Because of these advantages, many governments are promoting this technology in their industries. Many even offer incentives to help companies upgrade to variable-speed drives. Therefore, the variable-speed drive can benefit many air compressor installations.
One major benefit of a variable-speed drive is its ability to optimize energy use. Variable frequency drives are able to ramp up and down to match the demand for air. The goal is to optimize the pressure and flow in the system so that the best “dead band” occurs between forty percent and eighty percent of full load. A variable-speed compressor will also increase energy efficiency because of its programmability.
A variable-speed air compressor can also be used to control the amount of air that is compressed by the system. This feature adjusts the frequency of power supplied to the motor based on the demand. If the demand for air is low, the frequency of the motor will reduce to save energy. On the other hand, if there is an excess demand for air, the variable-speed compressor will increase its speed. In addition, this type of air compressor is more efficient than its fixed-speed counterpart.
A VFD has many benefits for compressed air systems. First, it helps stabilize the pressure in the pipe network, thereby reducing the power losses due to upstream pressure. It also helps reduce the power consumption caused by fluctuations in upward pressure. Its benefits are also far-reaching. And as long as the air pressure and air supply is properly sized, a VFD will help optimize the efficiency of compressed air systems.

China 20HP Screw Air Compressor with Tank and Air Dryer/ Filter 15kw     with Best SalesChina 20HP Screw Air Compressor with Tank and Air Dryer/ Filter 15kw     with Best Sales
editor by czh 2023-01-29

Recent Posts